If you’re planning to get a paint job done, it is highly essential that you have a smooth and paintable surface to work with. Any kind of wall damage can create major problems during the painting process, and it can also lead to an uneven finish.
Before you apply the first layer of paint, you need to make sure that the wall is damage-free and primed properly. Are you someone who is not very handy? Or, are you just unsure about how to fix wall damage? If your answer is yes, then don’t worry!
There are a few different ways that you can go about repairing wall damage, and the best method will depend on the severity of the damage.
Removing Dents & Dings from the Wall Surface
One of the raising concerns is how to get rid of holes, dents, or dings in the walls. So if you’re facing something similar, then here’s what you need to do.
You need to first arrange the following items:
- Fast-drying spackling
- Sandpaper or drywall sanding sponge
- Drywall knife
How to Fix It:
Now, follow these steps:
- Start by using the drywall knife to scrape away any loose paint or debris from the damaged area.
- Next, apply a small amount of spackling onto the area and use the knife to smooth it out.
- Allow the spackling to dry completely before moving on to the next step.
- Once it’s dry, use the sandpaper or sanding sponge to lightly sand down the area until it’s smooth.
- Wipe away any dust with a damp cloth and you’re all set!
Removing Popped Nail Heads
Just as much as clearing out the dents is important, in the same way, it is also crucial to take out the popped nail heads. Popped nail heads are a common problem that can occur in both old and new homes. They are usually caused by moisture and humidity, which causes the nails to loosen and pop out of the wall. If you have a popped nail head, then follow these steps to fix it:
How to Fix It:
- Start by using a hammer to drive the nail back into the wall until it’s flush with the surface.
- Next, use a drywall screw to screw the nail into the wall. Make sure that you don’t over-tighten the screw, or else it will cause the drywall to crack.
- Finally, use a putty knife to apply a small amount of spackling onto the screw head. Allow it to dry completely before painting over it.
ALSO READ: Tips for Choosing the Right Paint and Color for Your Residence
Holes in the Wall
Whether it’s caused by a doorknob or a wayward baseball, holes in the wall are inevitable. But don’t worry, they’re actually pretty easy to fix!
You will need the following items:
- Drywall compound
- Mesh patch kit
- Drywall knife
How to Fix It:
- Start by using the drywall knife to cut away any loose or damaged drywall around the hole.
- Next, use the mesh patch kit to apply a patch over the hole. Make sure that you smooth out the edges so that it’s flush with the surrounding wall.
- Use the drywall compound to apply a thin layer over the patch. Allow it to dry completely before sanding it down.
- Finally, use a paint brush or roller to apply a coat of primer over the area. Once it’s dry, you can go ahead and paint over it.
Do you find this information helpful? If you don’t want to fix the wall damage by yourself and need professional help then don’t hesitate to contact us. At Budget & Save Painter, we will be more than happy to assist you. Our painters in Vancouver are not only experienced but also skilled and will provide you with the best possible results.
Contact us today for a free quote!
